|10/100 Low Profile Ethernet Adapter - Overview|
The IBM 10/100 Ethernet Adapter (Low Profile Enabled) brings you a high performance network interface based on the advanced PCI local bus platform.
The WOL feature lets the network administrator remotely wake up any computer after hours. With PCI 2.2 systems, all WOL signaling and power connections are via the PCI BUS connector between the adapter and the system. When the Desktop Management Interface (DMI) Agent is installed, this card lets network administrators take full control over all the desktop hardware and software resources on the network. The adapter uses a single RJ-45 connection and comes with a standard height PCI 2.2 bracket installed. It includes a low-profile PCI bracket to allow installation in the latest low profile systems. The adapter conforms to IEEE 802.3u 100BASE-TX, IEEE802.3 10BASE-T standard and meets PCI local bus revision 2.2 specifications. The 10/100 Mbps speed supports half- and full-duplex mode and is auto-sensed by auto negotiation technology that conforms to the IEEE 802.3u standard. Extensive drivers for commonly used network operation systems such as Microsoft Windows 95, 98, 2000, NT 4.0, IBM OS/2 LAN Server, and Novell NetWare 4.x, 5.0 are supported.
The IBM 10/100 Ethernet Adapter (Low Profile Enabled) provides a low cost, high-performance connection to 10Base-T or 100Base-TX. Features
This product replaces
This product was replaced by
You will receive one box containing the following items:
Product marketing and replacement part numbers (FRU)
Part numbers applicable to: World Wide
Performance specifications as known at time of announcement
This adapter supports data transfer at 10Mbps and 100Mbps depending on the hub or switch it connects into.
Physical, environmental, and compatibility specifications as known at time of announcement
No . The ENERGY STAR emblem does not represent EPA endorsement of any product or service.
Hardware requirements for IBM systems
The 10/100 Ethernet Adapter (Low Profile Enabled) is supported on all PCI 2.2 compliant systems. The adapter includes a low profile PCI bracket to allow installation in low profile systems.
Hardware requirements for non-IBM systems
The 10/100 Ethernet Adapter (Low Profile Enabled) is supported on non-IBM systems that accept half-size PCI 2.2-compliant adapters.
Supported operating systems
This adapter is compatible with PCI 2.2, DMI 2.0, ACPI, Microsoft PC99 certification (WHQL), IEEE 802.3x, Pre-OS Boot Protocol Support (PXE 2.0, BootP/DHCP, NCP, RPL)
Some configurations may not be supported.
|Document ID: MIGR-4KWS2V|
|Last Modified: 2000-06-13|
|Copyright © 2001 IBM Corporation|