| 10/100 EtherLink PCI Management Adapter - Overview |
| Applicable Countries/Regions |
| Worldwide |
| Product Information |
|
General information
The 10/100 EtherLink PCI Management Adapters feature enhanced manageability including remote system alerts. This allows network administrators to monitor PCs for case intrusion, voltage and temperature levels, and boot failures. In addition, the adapters have an onboard managed PC Boot Agent for improved remote wake up capabilities, which enable network administrators to remotely install software, configure PCs, and backup hard drives. The 10/100 EtherLink PCI Management Adapters include PC management features that permit power-up of PCs from a central point of management. The managed PC Boot Agent added to the adapter in the PC provides flexibility to perform a pre-OS boot. This allows the PC to boot from the network before loading the operating system. The remote wake up feature will respond to a magic packet signal sent from a remote management agent. These 10/100 adapters provide 10Base-T Ethernet and 100Base-TX Fast Ethernet LAN attachment for Intel 80386, or higher, PCs with a PCI Bus. The adapters offer ease of use with a Microsoft Windows software diagnostic for easy installation and troubleshooting and LEDs that indicate link integrity and activity for both 10Mbps and 100Mbps. Additionally, the Dynamic Access Software brings intelligence to these adapters with features such as standards-based traffic prioritization and dRMON Smart Agent software for comprehensive and affordable network management. The adapters ship with device drivers for all leading operating systems and network operating systems. Warranty The warranty for this product is a limited lifetime customer carry-in exchange warranty from 3Com Corporation. Warranty support and service for the product is provided by IBM when the product is installed into an IBM system for the duration of the warranty on the system. This product replaces None This product was replaced by Not applicable Packaging You will receive one box containing the following items:
Product marketing and replacement part numbers (FRU) Part numbers applicable to: World Wide
Additional part numbers Part number(s) for ordering multiple quantities Cardpack: 09N3610 Bulkpack of 100: 09N3600 Product dates World Wide
Technical specifications Performance specifications as known at time of announcement This adapter supports data transfer at 10Mbps and 100Mbps depending on the hub it connects into. Physical, environmental, and compatibility specifications as known at time of announcement Width
Depth
Power requirements
Operating temperature
Relative humidity Operating: between 20% and 80% (non-condensing) Agency approvals
ENERGY STAR-Compliant No . The ENERGY STAR emblem does not represent EPA endorsement of any product or service. Hardware requirements for IBM systems These adapters can be used in any bus mastering PCI slot in a PC containing an Intel 80386, or higher, processor. The remote wake up feature can be used only in a PC which has been designed to support this capability. PCs which are compliant with PCI 2.2, enable this capability through the PCI bus. PCs which are not PCI 2.2-compliant must support the 3-pin header cable and provide auxiliary power for +5V +/-5%@375mA. Hardware requirements for non-IBM systems Not applicable Software requirements
Compatibility This adapter is compatible with PCI 2.2, DMI 2.0, ACPI, Wired for Management (WfM) 1.1a, 2.0, Microsoft PC99 certification (WHQL), RMON, IEEE 802.1 P/Q, IEEE 802.3x, IEEE 802.3 ac, Pre-OS Boot Protocol Support (PXE 2.0, BootP/DHCP, NCP, RPL) Limitations This adapter requires drivers at EtherDisk level 5.0, or above. Some configurations may not be supported. Cables and operating distances
Other Installation time is approximately 30 minutes. Document notes
|
| Document ID: MIGR-4L5LGQ |
| Last Modified: 2000-06-09 |
| Copyright © 2001 IBM Corporation |