This flash BIOS update is for use on 2161 and 2162 Aptiva systems.
It installs BIOS level BVAxx4K (BVAUS4K on US models) on all specified systems.

Executing this file will run a program which creates a bootable floppy. Booting the computer off of the floppy will flash the BIOS, updating it to the most current level. This can solve conflicts with new hardware and software that require information not in the original BIOS in order to interact with the system.

Downloadable File:

VFLASH.EXE
[612,507 bytes]
Released 1/22/99

Installation:

Download the VFLASH.EXE file to your hard drive
Insert a blank 3.5" floppy diskette in Drive A:\ and Double-Click on the VFLASH file stored on your hard drive to run it. Running this file will extract the necessary files to create the BIOS flash diskette.
Shut the system down normally. Be sure it is powered off, not suspended.
Insert the BIOS update diskette in the diskette drive and start (boot) the system.
A menu will prompt you to choose the desired language.
You will be asked if you would like to change the serial number. Choose (N)o.
You will be asked if you would like to change the machine type/model. Choose (N)o.
The system BIOS will be updated. When the BIOS update is complete, remove the diskette and press the enter key to reboot the system. *** Do not do this until you are prompted to do so. ***

NOTE: Unless you are an authorized servicer, DO NOT change the model number or serial number of the system. Doing so could cause your Aptiva not to function properly with software designed specially for the system.

More Information:

This update adds the following modifications to the BVAUS4K BIOS build contained within VFLASH:

Fixed ATAPI drive detection issue
Fixed check for real-time clock (RTC) update-in-progress
Updated Y2K rollover algorithm in the timer tick
Added checks for RTC update-in-progress in power management

WARNING~!
Do NOT turn off or reboot your system while updating the BIOS! Should you do so irreparable damage may be done to the system.