Aptiva BIOS Updates
E26FIX

This flash BIOS update is for use on select 2137 Aptiva systems. It installs BIOS level JW3EN5E on the system.

Executing this file will run a program which creates a bootable floppy. Booting the computer off of the floppy will flash the BIOS, updating it to the most current level. This can solve conflicts with new hardware and software that require information not in the original BIOS in order to interact with the system. In particular this file should be used to correct problems such as lock ups and hangs while using IBM ViaVoice.

Downloadable File:
  • E26FIX.EXE
    [458,805 bytes]
    Released 3/17/98
Supported Models:

This BIOS is for the following 2137 systems:

E03 E05 E06 E07 E08 E14 E15 E16
E24 E25 E26 E34 E35 E44 E45 E46
E56 E84 E8H EQ1 EQ2 EQ3 EQ4 E51
E53 E60 E61 E63 E71 E73 E74 E75

IMPORTANT NOTE:

On the 2137-E24 and 2137-E34 models there are two possible BIOS files, E26FIX.EXE or XA1FLASH.EXE, depending on the currently installed BIOS version. Owners of E24 and E34 models should click here to determine the proper file to apply.

Applicable Countries:

Australia, Canada, United Kingdom, New Zealand, United States

Installation:

  1. Download the E26FIX.EXE file to your hard drive

  2. Insert a blank 3.5" floppy diskette in Drive A:\ and Double-Click on the E26FIX file stored on your hard drive to run it. Running this file will extract the necessary files to create the BIOS flash diskette.

  3. Shut the system down normally. Be sure it is powered off, not suspended.

  4. Insert the BIOS update diskette in the diskette drive and start (boot) the system.

  5. A menu will prompt you to choose the desired language.

  6. You will be asked if you would like to change the serial number. Choose (N)o.

  7. You will be asked if you would like to change the machine type/model. Choose (N)o.

  8. The system BIOS will be updated. When the BIOS update is complete, remove the diskette and press the enter key to reboot the system. *** Do not do this until you are prompted to do so. ***
NOTE: Unless you are an authorized servicer, DO NOT change the model number or serial number of the system. Doing so could cause your Aptiva not to function properly with software designed specially for the system.

More Information:

This update corrects the known issue of lockups when using IBM ViaVoice on 2137 Aptiva systems


Your Feedback Welcomed!
WARNING~!
Do NOT turn off or reboot your system while updating the BIOS! Should you do so irreparable damage may be done to the system.

Back to Aptiva BIOS Updates


© Don Schneider, 1999
DON5408's Unofficial Aptiva Support Site